Selection & Installation

0
232

Product characteristics

It is important that the cleats are installed properly to secure your cables: • It is not necessary for every cleat to be attached to the tray. Every other cleat
(■) must be attached to the tray system to mount cable in tray. Unattached cleats
(■) provide additional restraint to keep cables bundled.
• The bend radius should be 8 to 12 times the cable diameter.
• Cleats should always be installed at the beginning, middle and end of a bend
(●), and at no time should the distance between cleats on a bend be more than 0.3M center to center.