Mono Cable Chain

Machine tools, Automatic energy saving machinery and tools Woodworking machine, Fiber Machine, All types of plant equipment automation industry,

0
547

Types mono cable chain

Mono cable chain SMO-0625

Dimensions in mm:Pitch 62.5 Chain material : KS/PA glass fibre reinforced Special materials are available where required. Standard colour : black Maximum temperatures : -20℃ + 125℃ Where continuous temperatures fall either below minimum or exceed maximum, please refer to us.

Mono cable chain SMO-0450

Dimensions in mm :Pitch 45 Chain material : KS/PA glass fibre reinforced Special materials are available where required. Standard colour : black Maximum temperatures : -30℃ + 130℃ Where continuous temperatures fall either below minimum or exceed maximum, please refer to us.

Mono Cable Chain SMO-0320

Dimensions in mm :Pitch 32 Chain material : KS/PA glass fibre reinforced Special materials are available where required. Standard colour : black Maximum temperatures : -30℃ + 130℃ Where continuous temperatures fall either below minimum or exceed maximum, please refer to us.

More types Plastic chain

Mono cable chain characteristics

Application

The range of SHINSUNG moulded plastic cable and hose drag chains provides reliable system for the supply of services to moving equipment. They can be used whenever the cables/hoses are light, the travel is small and the operating environment permits the use of plastics. SHINSUNG plastic drag chains have been in service for many years and they are used to supply robots, machine tools, computerised handling systems and measuring devices.

Structure

The chain is assembled using one-piece moulded units easily snap connected to form a chain of the required length. The design of the link provides the self-supporting feature of the chain. The unique design of the SHINSUNG plastic chain with hinged bars permits the easy installation of cable and hoses. This new design feature allows the chain to be replaced should accidental damage occur without disconnection of the cable and hoses from the supply.

Typical Application

If the carrying capacity of a standard chain is too small, it is easy to use two or more chains as shown.

Support Tray

An even support surface is necessary to ensure correct operation of the SHINSUNG drag chain. If this not available then a support tray in standard lengths of 2000mm can be supplied(special designs on request).

Installing the chain

The static fixed point of the drag chain should be placed in the centre of the travel length. This ensures the shortest possible length of chain between the fixed and moving points. Connecting brackets of galvanised steel are provided as a standard feature and the brackets are normally pressed into place.For longer lengths of travel and higher loads, the brackets are bolted to the chain.

Material – specification

Standard material : KS/PA2) – glass fibre strengthened
colour : black 1)

Upon request moulded plastic cable drag chains can be supplied in the colours white, red, yellow, beige and on enquiry in further colours. In order to achieve maximum colour effect, several colours can be combined. In both cases, extra price for small quantities.Moulded plastic cable drag chains for application in the range of radio-active radiation or for permanent temperatures below-20 require a material adaptation and can also be delivered by SHINSUNG. Please give us detailed information on your environment conditions.

Chemical constancy of the standard material at 20°C Please contact us for all materials not shown in this table.